Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SILVERADO 2500 HD LT, 2D CAB CHASSIS, 6.6L ENG VIN 8, RWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSELECTRICAL COMPONENT LOCATOR - INSTRUMENT PANEL/CENTER CONSOLE COMPONENT VIEWSINSTRUMENT PANEL/CENTER CONSOLE COMPONENT VIEWSFRONT OF THE I/P COMPONENTS (YE9)
2013 Chevrolet Silverado 2500 HD LT, 2D Cab Chassis, 6.6L Eng VIN 8, RWD
Front of the I/P Components (YE9)
2013 Chevrolet Silverado 2500 HD LT, 2D Cab Chassis, 6.6L Eng VIN 8, RWDSECTION Front of the I/P Components (YE9)
Front of the I/P Components (YE9)
| Component Name | Callout |
|---|---|
| Instrument Panel Cluster (IPC) | 1 |
| Inflatable Restraint Steering Wheel Module | 2 |
| Shift Control Lever | 3 |
| Ambient Light/Sunload Sensor Assembly (CJ2)/Ambient Light Sensor (C67/C42) | 4 |
| Speaker - Center I/P (UQA with Y91) | 5 |
| Radio | 6 |
| Inflatable Restraint I/P Module | 7 |
| I/P Compartment Lamp | 8 |
| HVAC Control Module | 9 |
| Accessory Power Outlet - I/P 2 | 10 |
| Multifunction Switch Assembly - I/P | 11 |
| Accessory Power Outlet - I/P 1 | 12 |
| Driver Information Center (DIC) Switch (UK3) | 13 |
| Steering Wheel Control Switch - Right (UK3) | 14 |
| Steering Wheel Control Switch - Left (K34/KA9) | 15 |
| Trailer Brake Control Switch (JL1) | 16 |
| Headlamp and Panel Dimmer Switch | 17 |
| Dimmer Control | 18 |
| Transfer Case Shift Control Switch (NQF/NQH) | 19 |
| Turn/Signal Multifunction Switch | 20 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.