SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013SILVERADO 1500 LS, 4D PICKUP, RWDREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHEATING, VENTILATION, AND AIR CONDITIONINGSPECIFICATIONSREFRIGERANT SYSTEM SPECIFICATIONS (NON-HP2)
2013 Chevrolet Silverado 1500 LS, 4D Pickup, RWD

Refrigerant System Specifications (Non-HP2)

2013 Chevrolet Silverado 1500 LS, 4D Pickup, RWDSECTION Refrigerant System Specifications (Non-HP2)
Refrigerant System Specifications (Non-HP2)

Application Specification
Metric English
PAG Oil GM P/N 12378526 for United States
PAG Oil GM P/N 88900060 for Canada
Accumulator Replacement 60 ml* 2 oz*
  • * Add PAG oil equal to the amount of oil drained from the accumulator plus the specified additional amount.
Compressor Replacement 60 ml1 2 oz1
  • The Denso service compressor is precharged with 237 ml (8.0 oz) of PAG oil.
Condenser Replacement 30 ml1 1 oz1
Evaporator Replacement 90 ml1 3 oz1
Evaporator, Rear Replacement 90 ml1 3 oz1
  • Total System PAG Oil Capacity
 210 ml 7.1 oz
  • Total System PAG Oil Capacity with Rear A/C
 330 ml 11 oz
R-134a
  • Refrigerant Charge
 0.7 kg 1.6 lb
  • Refrigerant Charge Utility with Front and Rear A/C
 1.13 kg 2.5 lb
  • Refrigerant Charge Suburban with Front and Rear A/C
 1.4 kg 3.0 lb
1 If more than the specified amount of PAG oil was drained from a component, add the equal amount of oil drained.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.