SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013EQUINOX LS, AWD, GASREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSRADIO SPEAKER AMPLIFIER REPLACEMENT
2013 Chevrolet Equinox LS, AWD, Gas

Radio Speaker Amplifier Replacement

2013 Chevrolet Equinox LS, AWD, GasSECTION Radio Speaker Amplifier Replacement
Fig 1: Radio Speaker Amplifier
GM2244768Courtesy of GENERAL MOTORS COMPANY
Radio Speaker Amplifier Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the instrument insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Equinox) , Instrument Panel Insulator Panel Replacement - Left Side (Terrain)
  2. Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Equinox) , Driver Knee Bolster Reinforcement Replacement (Terrain)
1 Amplifier Bracket Push On Nuts (Qty: 3)
2 Radio Speaker Amplifier Bolts (Qty: 3)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
3 Radio Speaker Amplifier
Procedure 
Disconnect the electrical connectors.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.