SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2013EQUINOX LS, AWD, GASREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMREPAIR INSTRUCTIONSRADIO ANTENNA CABLE EXTENSION CABLE CONNECTOR REPLACEMENT
2013 Chevrolet Equinox LS, AWD, Gas

Radio Antenna Cable Extension Cable Connector Replacement

2013 Chevrolet Equinox LS, AWD, GasSECTION Radio Antenna Cable Extension Cable Connector Replacement
Fig 1: Radio Antenna Cable Extension Cable Connector
GM2252599Courtesy of GENERAL MOTORS COMPANY
Radio Antenna Cable Extension Cable Connector Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the radio. Refer to Radio Replacement .
  2. Remove the driver side knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Equinox) , Driver Knee Bolster Reinforcement Replacement (Terrain) .
1 Radio Antenna Cable Extension Cable Connector

Procedure

  1. Disconnect all of the electrical connectors. Cable connects to the radio, communication interface module, and the navigation signal splitter.
  2. Note the cable routing prior to removal for installation purposes.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.