Front Side Door Window Inner Sealing Strip Replacement

2013 Chevrolet Equinox LS, AWD, GasSECTION Front Side Door Window Inner Sealing Strip Replacement
Fig 1: View Of Front Side Door Window Belt Inner Sealing Strip
GM1718895Courtesy of GENERAL MOTORS COMPANY
Front Side Door Window Inner Sealing Strip Replacement

Callout Component Name
Preliminary ProceduresΒ 
Remove front door trim panel. Refer to Front Side Door Trim Panel Replacement .
1 Front Side Door Inner Window Sealing Strip

Procedure

  1. Start from the front edge of the door, pull upward on the inner window sealing strip to release it from the pinch-weld flange.
  2. Install the inner window sealing strip to the front edge of the door, press firmly onto the pinch-weld flange and work it rearward.
  3. Inspect the operation of the window before installing the door trim panel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.