Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Liftgate Description and Operation: Operation
The power liftgate can be commanded to function in the following methods:
- An open/close command from the power liftgate mode switch
- An open command from the liftgate outside handle release switch
- A close command from the liftgate shutface switch
- An open request by a signal from the key fob to the remote control door lock receiver
The liftgate module will respond to a request by commanding the liftgate latch to release the liftgate and commanding the liftgate pump motor to activate and pump hydraulic fluid to the liftgate control arm piston raising the liftgate to the open position.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.