Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2012TRAVERSE LTZ, FWDREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR BODY PANELSBUMPERS AND FASCIASREPAIR INSTRUCTIONSFRONT BUMPER IMPACT BAR REPLACEMENT

2012 Chevrolet Traverse LTZ, FWD

Front Bumper Impact Bar Replacement

2012 Chevrolet Traverse LTZ, FWDSECTION Front Bumper Impact Bar Replacement

Fig 1: Identifying Front Bumper Impact Bar

GM1847153

Courtesy of GENERAL MOTORS COMPANY

Front Bumper Impact Bar Replacement

Callout

Component Name

Preliminary Procedure
Remove the bumper fascia. Refer to Front Bumper Fascia Replacement (Enclave) , Front Bumper Fascia Replacement (Acadia) , Front Bumper Fascia Replacement (Traverse) .

1

Front Bumper Impact Bar Bracket Bolt (Qty: 6)

CAUTION:

Refer to Fastener Caution .

Tighten
50 N.m (37 lb ft)

2

Front Bumper Impact Bar

Procedure

Disconnect the electrical connectors/harnesses as needed.
Transfer any parts as needed.
Remove right and left side air baffle attached at the impact bar.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.