SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CHEVY EXPRESS G2500, VAN PASSENGER, 4.8L ENG VIN AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2466 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 5 OF 5)SUNROOF CONTROL MODULE (CF5)
2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN A

Sunroof Control Module (CF5)

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Sunroof Control Module (CF5)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sunroof Control Module (CF5) Connector End View
GM1467121Courtesy of GENERAL MOTORS CORP.
Sunroof Control Module (CF5)

Pin Wire Color Circuit Function
1 2 RD/WH 3140 Battery Positive Voltage
2 2 BK 1050 Ground
3 0.35 D-GN 2074 Sunroof Switch Express Signal
4 - - Not Used
5 0.35 YE 43 Ignition Voltage
6 0.35 WH 5429 Ignition Voltage
7 0.35 BN 100 Sunroof Switch Open Signal
8 0.35 PK 2075 Sunroof Switch Close Vent Signal
9 0.35 L-BU 110 Sunroof Switch Close Switch Signal
10 0.35 OG/BK 144 Sunroof Switch Open Vent Signal
Connector Part Information 
  • OEM: KET MG 651056
  • Service: See Catalog
  • Description: 10-Way F 090-II Series (WH)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.