SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CHEVY EXPRESS G2500, VAN PASSENGER, 4.8L ENG VIN AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2463 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 2 OF 5)DRIVE MOTOR GENERATOR POWER INVERTER MODULE COVER (HP2)
2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN A

Drive Motor Generator Power Inverter Module Cover (HP2)

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Drive Motor Generator Power Inverter Module Cover (HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Motor Generator Power Inverter Module Cover (HP2) Connector End View
GM684799Courtesy of GENERAL MOTORS CORP.
Drive Motor Generator Power Inverter Module Cover (HP2)

Pin Wire Color Circuit Function
A 0.5 PU 5087 High Voltage Interlock Circuit +
B 0.5 PU 5087 High Voltage Interlock Circuit +
Connector Part Information 
  • OEM: 12077900
  • Service: 12116247
  • Description: 2-Way F Metri-Pack 280 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12077411/2
  • Core/Insulation Crimp: 2/5
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.