SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CHEVY EXPRESS G2500, VAN PASSENGER, 4.8L ENG VIN AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2463 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 2 OF 5)DOOR LOCK/WINDOW SWITCH - DRIVER X3
2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN A

Door Lock/Window Switch - Driver X3

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Door Lock/Window Switch - Driver X3
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Door Lock/Window Switch - Driver X3 Connector End View
GM1664581Courtesy of GENERAL MOTORS CORP.
Door Lock/Window Switch - Driver X3

Pin Wire Color Circuit Function
1 0.35 D-BU/WH 6160 Driver Folding Mirror Motor Retract Control
2 0.35 D-GN/WH 6159 Driver Folding Mirror Motor Extend Control
3 0.35 BK 627 Low Reference
4 0.35 PK 1691 Low Reference (DL3/DR4)
5 0.35 L-BU/WH 1314 Left Front Turn Signal Lamp Control (DL3/DPN)
6 0.35 YE 7197 Driver Folding Mirror Motor Retract Control
7 0.35 BK 2267 Mirror Heating Element Control
8 - - Not Used
9 0.35 GY 1690 Automatic Day/Night Mirror Signal (DL3/DR4)
10 0.35 BK 1050 Ground (DL3/DPN)
Connector Part Information 
  • OEM: 15491259
  • Service: 15127042
  • Description: 10-Way F Kaizen 0.64 Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.