SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CHEVY EXPRESS G2500, VAN PASSENGER, 4.8L ENG VIN AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2462 (COMPONENT CONNECTOR END VIEW (1 OF 5))BLOWER MOTOR CONTROL MODULE - AUXILIARY X2 (C69)
2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN A

Blower Motor Control Module - Auxiliary X2 (C69)

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Blower Motor Control Module - Auxiliary X2 (C69)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Blower Motor Control Module - Auxiliary X2 (C69) Connector End View
GM1837860Courtesy of GENERAL MOTORS CORP.
Blower Motor Control Module - Auxiliary X2 (C69)

Pin Wire Color Circuit Function
1-2 - - Not Used
3 0.35 PU 2211 Auxiliary Blower Motor Speed Control (LWB)
0.35 D-GN 2211 Auxiliary Blower Motor Speed Control (SWB)
4 - - Not Used
5 3 OG 1450 Ground (LWB with CJ3)
0.35 OG 1450 Ground (LWB with CJ2)
3 BK 1450 Ground (SWB with CJ3)
0.35 BK 1450 Ground (SWB with CJ2)
6 3 BK 1740 Battery Positive Voltage (LWB with CJ3)
0.35 BK 1740 Battery Positive Voltage (LWB with CJ2)
3 RD/WH 1740 Battery Positive Voltage (SWB with CJ3)
0.35 RD/WH 1740 Battery Positive Voltage (SWB with CJ2)
Connector Part Information 
  • OEM: 13520671
  • Service: See Catalog
  • Description: 6-Way F GT 150 6.3 Series (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.