SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CHEVY EXPRESS G2500, VAN PASSENGER, 4.8L ENG VIN AREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2462 (COMPONENT CONNECTOR END VIEW (1 OF 5))ASSIST STEP CONTROL MODULE X1 (BRS)
2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN A

Assist Step Control Module X1 (BRS)

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Assist Step Control Module X1 (BRS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Assist Step Control Module X1 (BRS) Connector End View
GM1626671Courtesy of GENERAL MOTORS CORP.
Assist Step Control Module X1 (BRS)

Pin Wire Color Circuit Function
1 2 D-GN 7469 Articulating Running Board Motor Right Control Retract
2 3 BK 1350 Ground
3 2 OG 7471 Articulating Running Board Motor Left Control Extend
4 2 D-BU 7470 Articulating Running Board Motor Right Control Extend
5 3 RD/BK 1142 Battery Positive Voltage
6 2 GY 7472 Articulating Running Board Motor Left Control Retract
Connector Part Information 
  • OEM: 15476196
  • Service: 88988888
  • Description: 6-Way F GT 280 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.