Sunroof Motor/Actuator Replacement

2012 Chevrolet Chevy Express G2500, Van Passenger, 4.8L Eng VIN ASECTION Sunroof Motor/Actuator Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Sunroof Motor/Actuator & Components
GM1685765Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the overhead console. Refer to Roof Console Replacement .
  2. Remove the sunroof module bracket. Refer to Sunroof Module Bracket ReplacementΒ .
1 Sunroof Motor/Actuator Plug
2 Sunroof Motor/Actuator Screws (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:Β  6 N.m (53 lb in)

3 Sunroof Motor/Actuator
Tip:Β 
  1. Pull downward to disengage the motor/actuator from the sunroof module.
  2. It will be necessary to reteach the motor. Sunroof Motor/Actuator Initialization/Teach ProcessΒ .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.