SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2012CAMARO LS, STANDARD TRANSREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - K20 X3 THROUGH X85COMPONENT CONNECTOR END VIEWSK33 HVAC CONTROL MODULE X2
2012 Chevrolet Camaro LS, Standard Trans

K33 HVAC Control Module X2

2012 Chevrolet Camaro LS, Standard TransSECTION K33 HVAC Control Module X2
GM1715223Courtesy of
Connector Part Information
  • Harness Type: HVAC
  • OEM Connector: 15489824
  • Service Connector: 15126711
  • Description: 20-Way F 64 Series (BK)
Terminal Part Information
  • Terminated Lead: 13575845
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
K33 HVAC Control Module X2

Pin Wire Circuit Function
1 - - Not Used
2 0.35 D-BU 3167 Mode Door Stepper Motor Control 3
3 0.35 GY 3165 Mode Door Stepper Motor Control 1
4 0.35 BN 3168 Mode Door Stepper Motor Control 4
5 0.35 D-GN 3166 Mode Door Stepper Motor Control 2
6-8 - - Not Used
9 0.35 TN 407 Low Reference
10 - - Not Used
11 0.35 TN/BK 3169 Temp Door Stepper Motor Control 1
12 0.35 PU 3170 Temp Door Stepper Motor Control 2
13 0.35 L-GN 3171 Temp Door Stepper Motor Control 3
14 0.35 L-BU 3172 Temp Door Stepper Motor Control 4
15 0.5 OG 7572 HVAC Motor Supply Voltage
16 0.35 D-BU/WH 3173 Air Inlet Door Stepper Motor Control 1
17 0.35 BN/WH 3174 Air Inlet Door Stepper Motor Control 2
18 0.35 YE 3175 Air Inlet Door Stepper Motor Control 3
19 0.35 WH 3176 Air Inlet Door Stepper Motor Control 4
20 0.35 GY 6137 EVAP Core Temperature Sensor Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.