SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 815 (TRANSFER CASE - NVG 246-NP8)COMPONENT LOCATORTRANSFER CASE CONTROL CONNECTORSTRANSFER CASE SHIFT CONTROL SWITCH
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Transfer Case Shift Control Switch

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Transfer Case Shift Control Switch
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case Shift Control Switch Connector End View
GM1710988Courtesy of GENERAL MOTORS CORP.
Transfer Case Shift Control Switch Connector Parts Information

Connector Part Information 
  • OEM: 13551678
  • Service: 89047364
  • Description: 12-Way F Receptacle 0.64 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Transfer Case Shift Control Switch Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 WH 2283 Rear Wiper/Washer Switch Supply Voltage
3 BN 1560 Neutral Indicator Control
4 PU/WH 6816 Indicator Dimming Control
5 BN/WH 230 Instrument Panel Lamp Dimming Control
6 BK 1050 Ground
7 PK 1561 AWD Indicator Control
8 L-GN/BK 1563 2 'HI' Indicator - Control
9 TN/BK 1566 4 'HI' Indicator - Control
10 PU/WH 1565 4 'LO' Indicator - Control
11 GY 6029 Four Wheel Drive Mode Switch 5-Volt Reference
12 L-BU 1693 Switch Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.