SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 815 (TRANSFER CASE - NVG 246-NP8)COMPONENT LOCATORTRANSFER CASE CONTROL CONNECTORSTRANSFER CASE ENCODER MOTOR (NP8)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Transfer Case Encoder Motor (NP8)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Transfer Case Encoder Motor (NP8)
WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case Encoder Motor (NP8) Connector End View
GM646372Courtesy of GENERAL MOTORS CORP.
Transfer Case Encoder Motor (NP8) Connector Parts Information

Connector Part Information 
  • OEM: 15326654
  • Service: 88986254
  • Description: 8-Way F GT 280 Series Sealed (BK)
Terminal Part Information 
  • Pins: A-C
  • Terminal/Tray: 15304719/19
  • Core/Insulation Crimp: E/5
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: D-G
  • Terminal/Tray: 15304720/19
  • Core/Insulation Crimp: 4/5
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Transfer Case Encoder Motor (NP8) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A L-GN/BK 6028 Transfer Case Encoder 5-Volt Reference
B BN/WH 1555 Channel P Encoder - Signal
C TN/WH 1554 Encoder Low Reference
D TN 1552 Motor Control A
E OG 1553 Motor Control B
F RD/BK 1342 Battery Positive Voltage
G TN 1569 Lock Solenoid Control
H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.