Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1030 (TRANSFER CASE - MP 1625/1626-NQF)COMPONENT LOCATORTRANSFER CASE DISASSEMBLED VIEW
2011 Chevrolet Tahoe Base, 5.3 0, 4WD
Transfer Case Disassembled View
2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Transfer Case Disassembled View
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Transfer Case Front Output Shaft Seal |
| 2 | Transfer Case Vent |
| 3 | Transfer Case Input Shaft Seal |
| 4 | Transfer Case Input Shaft Bearing Outer Retaining Ring |
| 5 | Transfer Case Stud |
| 6 | Transfer Case Front Half |
| 7 | Transfer Case Half Locating Pin |
| 7 | Transfer Case Half Locating Pin |
| 8 | Transfer Case Input Shaft Bearing Assembly |
| 9 | Transfer Case Input Shaft Inner Retaining Ring |
| 10 | Transfer Case High/Low Internal Gear |
| 11 | Transfer Case High/Low Internal Gear Retaining Ring |
| 12 | Transfer Case Rear Output Shaft Rear Bearing Outer Retaining Ring |
| 13 | Vehicle Speed Sensor Assembly |
| 14 | Vehicle Speed Sensor - O-Ring - Seal |
| 15 | Transfer Case Rear Half |
| 16 | Transfer Case Access Hole Plug |
| 17 | Transfer Case - Harness - Bracket |
| 18 | Transfer Case Half Bolt/Screw |
| 19 | Transfer Case Rear Output Shaft Bushing |
| 20 | Transfer Case Rear Output Shaft Seal |
| 21 | Transfer Case Two/Four Wheel Drive Actuator Bolt/Screw |
| 22 | Transfer Case Two/Four Wheel Drive Actuator Assembly |
| 23 | Transfer Case Two/Four Wheel Drive Actuator Seal |
| 24 | Transfer Case Oil Fill Plug |
| 25 | Transfer Case Oil Drain Plug |
| 26 | Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Assembly |
| 27 | Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Assembly |
| 28 | Transfer Case Shift Detent Plunger Plug |
| 29 | Transfer Case Shift Detent Plunger Plug - O-Ring - Seal |
| 30 | Transfer Case Shift Detent Spring |
| 31 | Transfer Case Shift Detent Plunger |
| Callout | Component Name |
|---|---|
| 1 | Transfer Case High/Low Planetary Carrier Retaining Ring |
| 2 | Transfer Case High/Low Locking Plate |
| 3 | Transfer Case Planetary Carrier Sun Gear Thrust Washer |
| 4 | Transfer Case Input Shaft |
| 5 | Transfer Case Input Shaft Pilot Bearing Assembly |
| 6 | Transfer Case Input Shaft Pilot Bearing Retaining Ring |
| 7 | Transfer Case Planetary Carrier Sun Gear Thrust Washer |
| 8 | Transfer Case High/Low Planetary Carrier Assembly |
| 9 | Transfer Case High/Low Clutch |
| 10 | Transfer Case Two/Four Wheel Drive Synchronizer Sleeve |
| 11 | Transfer Case Two/Four Wheel Drive Shift Fork Insert |
| 12 | Transfer Case Shift Fork Spring |
| 13 | Transfer Case Two/Four Wheel Drive Shift Fork Assembly |
| 14 | Transfer Case Two/Four Wheel Drive Actuator Cam |
| 15 | Transfer Case Two/Four Wheel Drive Actuator Cam Retaining Ring |
| 16 | Transfer Case High/Low Shift Fork |
| 17 | Transfer Case High/Low Shift Fork Pads |
| 18 | Transfer Case High/Low Shift Fork Spring Assembly |
| 19 | Transfer Case High/Low Shift Fork Pin |
| 20 | Transfer Case Control Actuator Shaft |
| 21 | Transfer Case Rear Output Shaft |
| 22 | Transfer Case Two/Four Wheel Drive Synchronizer Inserts |
| 23 | Transfer Case Two/Four Wheel Drive Synchronizer Hub |
| 24 | Transfer Case Two/Four Wheel Drive Synchronizer Assembly |
| 25 | Transfer Case Two/Four Wheel Drive Synchronizer Blocking - Outer - Ring |
| 26 | Transfer Case Two/Four Wheel Drive Synchronizer Blocking - Inner - Ring |
| 27 | Transfer Case Front Output Shaft Drive Chain Assembly |
| 28 | Transfer Case Front Output Shaft Drive Sprocket |
| 29 | Transfer Case Front Output Shaft Drive Sprocket Bearing Assembly |
| 30 | Transfer Case Front Output Shaft Drive Sprocket Spacer - Rear |
| 31 | Transfer Case Front Output Shaft Drive Sprocket Retaining Ring |
| 32 | Transfer Case Oil Pump Assembly |
| 33 | Transfer Case Rear Output Shaft Speed Reluctor Wheel |
| 34 | Transfer Case Rear Output Shaft Rear Bearing Retaining Ring |
| 35 | Transfer Case Rear Output Shaft Rear Bearing Assembly |
| 36 | Transfer Case Rear Output Shaft Rear Bearing Retaining Ring |
| 37 | Transfer Case Oil Pump Suction Pipe Seal |
| 38 | Transfer Case Oil Pump Suction Pipe |
| 39 | Transfer Case Front Output Shaft Rear Bearing Assembly |
| 40 | Transfer Case Front Output Shaft Driven Sprocket Spacer |
| 41 | Transfer Case Front Output Shaft Driven Sprocket |
| 42 | Transfer Case Front Output Shaft Hole Plug |
| 43 | Transfer Case Front Output Shaft |
| 44 | Transfer Case Front Output Shaft Front Bearing Assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.