SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) X2 (AN3)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Memory Seat Module (MSM) X2 (AN3)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Memory Seat Module (MSM) X2 (AN3)
Fig 1: Memory Seat Module (MSM) X2 (AN3) Connector End View
GM1664521Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) X2 (AN3)

Pin Wire Circuit Function
1 0.35 GY 6206 Low Reference
2 0.35 PK 2426 Low Reference (without KB6)
3 0.35 YE 2080 Low Reference (without KB6)
4 - - Not Used
5 0.35 TN 2482 Low Reference (without KB6)
0.35 PK 2426 Low Reference (KB6)
6 0.35 PK 2435 Low Reference (without KB6)
0.35 YE 2080 Low Reference (KB6)
Connector Part Information
  • Harness Type: Driver Seat
  • OEM Connector: 6098-4607
  • Service Connector: 88989497
  • Description: 6-Way F (BK)
Terminal Part Information
  • Terminated Lead: 13575577
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: 8100-4443/22
  • Core/Insulation Crimp: E/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.