SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSMANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Manifold Absolute Pressure (MAP) Sensor

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Manifold Absolute Pressure (MAP) Sensor
Fig 1: Manifold Absolute Pressure (MAP) Sensor Connector End View
GM1914850Courtesy of GENERAL MOTORS CORP.
Manifold Absolute Pressure (MAP) Sensor

Pin Wire Circuit Function
1 0.5 GY 2704 5-Volt Reference
2 0.5 OG/BK 469 Low Reference
3 0.5 L-GN 432 Manifold Absolute Pressure (MAP) Sensor Signal
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 13639747
  • Service Connector: 19181248
  • Description: 3-Way F 2.8 Timer Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Pending
  • Release Tool: J-38125-36
  • Diagnostic Test Probe: J-35616-35 (VT)
  • Terminal/Tray: 4-964286-1/16
  • Core/Insulation Crimp: E/1
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.