SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT SIDE IMPACT MODULE - RIGHT FRONT (WITHOUT HP2 OR Z75 WITH HP2)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Inflatable Restraint Side Impact Module - Right Front (without HP2 or Z75 with HP2)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Inflatable Restraint Side Impact Module - Right Front (without HP2 or Z75 with HP2)
Fig 1: Inflatable Restraint Side Impact Module - Right Front (without HP2 or Z75 with HP2) Connector End View
GM295469Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Side Impact Module- Right Front (without HP2 or Z75 with HP2)

Pin Wire Circuit Function
A 0.5 PU 3066 Inflatable Restraint Side Impact Module- Right Front High Control
B 0.5 TN/BK 3067 Inflatable Restraint Side Impact Module- Right Front Low Control
Connector Part Information
  • Harness: Body
  • OEM: 12110505
  • Service: 15306044
  • Description: 2-Way F Metri-Pack 150 Series (YE)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 15306044
  • Release Tool: Not Available
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.