SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSHORN RELAY (VD1)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Horn Relay (VD1)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Horn Relay (VD1)
Fig 1: Horn Relay (VD1) Connector End Views
GM535912Courtesy of GENERAL MOTORS CORP.
Horn Relay (VD1)

Pin Wire Circuit Function
30 0.8 RD/WH 3640 Battery Positive Voltage
85 0.35 TN 28 Horn Switch Signal
86 0.8 RD/WH 3640 Battery Positive Voltage
87 0.8 GY 7559 Horn Feed
Connector Part Information
  • Harness: Forward Lamp
  • OEM: 12129716
  • Service: 15306045
  • Description: 4-Way F Metri-Pack 280 Series, Flexlock (GY)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 15306045
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 12110847/4
  • Core/Insulation Crimp: Pins 30, 86, 87- C/5
  • Core/Insulation Crimp: Pins 85- E/5
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.