SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSHEATED SEAT ELEMENT - PASSENGER BACK (AN3 OR KA1)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Heated Seat Element - Passenger Back (AN3 or KA1)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Heated Seat Element - Passenger Back (AN3 or KA1)
Fig 1: Heated Seat Element - Passenger Back (AN3 or KA1) Connector End View
GM39660Courtesy of GENERAL MOTORS CORP.
Heated Seat Element- Passenger Back (AN3 or KA1)

Pin Wire Circuit Function
A 1 D-BU 2479 Heated Seat Cushion Element Control (without KB6)
1 BN 6193 Heated Seat Cushion Element Control KB6)
B 1 L-BU 2433 Ground (without KB6)
1 OG 6194 Ground (KB6)
C 0.35 TN 2436 Passenger Heated Seat Back Temperature Sensor Signal (without KB6)
0.35 D-BU 2425 Passenger Heated Seat Back Temperature Sensor Signal (KB6)
D 0.35 TN 2482 Low Reference (without KB6)
0.35 PK 2426 Low Reference (KB6)
Connector Part Information
  • Harness Type: Passenger Seat
  • OEM Connector: 12047785
  • Service Connector: 12102900
  • Description: 4-Way F Metri-Pack 150 Series (BK)
Terminal Part Information
  • Pins: A, B
  • Terminated Lead: 13505668
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: E/C
  • Pins: C, D
  • Terminated Lead: 13575462
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-3 (GY)
  • Terminal/Tray: 12047581/2
  • Core/Insulation Crimp: E/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.