SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSHEADLAMP - RIGHT HIGH BEAM (X88)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Headlamp - Right High Beam (X88)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Headlamp - Right High Beam (X88)
Fig 1: Headlamp - Right High Beam (X88) Connector End View
GM684797Courtesy of GENERAL MOTORS CORP.
Headlamp- Right High Beam (X88)

Pin Wire Circuit Function
A 0.8 BK 150 Ground
0.8 BK 150 Ground
B 1 D-GN/WH 311 Right Headlamp High Beam Control
Connector Part Information
  • Harness Type: Right Headlamp
  • OEM Connector: 12059183
  • Service Connector: 12101898
  • Description: 2-Way F Metri-Pack 280 Series, Sealed (BK)
Terminal Part Information
  • Terminal/Tray: 12077411/2
  • Core/Insulation Crimp: 2/5
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.