SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR THROUGH ELECTRONIC POWER STEERING MODULE X1COMPONENT CONNECTOR END VIEWSDOOR LOCK/WINDOW SWITCH - PASSENGER X7
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Door Lock/Window Switch - Passenger X7

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Door Lock/Window Switch - Passenger X7
Fig 1: Door Lock/Window Switch - Passenger X7 Connector End View
GM1664543Courtesy of GENERAL MOTORS CORP.
Door Lock/Window Switch - Passenger X7

Pin Wire Circuit Function
1 0.35 YE 6804 Passenger Folding Mirror Motor Retract Control (DL3 or DR4)
2 0.35 L-BU 6805 Passenger Folding Mirror Motor Extend Control (DL3 or DR4)
3 0.35 OG/WH 5997 Passenger Exterior Courtesy Lamp Control
4 0.35 BN 787 Passenger Mirror Vertical Position Sensor Signal (DL3 or DR4)
5 0.35 L-BU/BK 785 Passenger Mirror Horizontal Position Sensor Signal (DL3 or DR4)
6 0.35 OG/WH 5999 Low Reference (DL3 or DR4)
7 0.35 PU 674 5-Volt Reference
8 0.35 PK 5861 Passenger Side Object Detection LED Signal (UFT)
9 - - Not Used
10 0.35 L-GN 675 Low Reference (DL3 or DR4)
Connector Part Information
  • OEM Connector: 15491260
  • Service Connector: 15127040
  • Description: 10-Way F Kaizen 0.64 Series (WH)
Terminal Part Information
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.