SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR THROUGH ELECTRONIC POWER STEERING MODULE X1COMPONENT CONNECTOR END VIEWSDOOR LOCK/WINDOW SWITCH - PASSENGER X3
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Door Lock/Window Switch - Passenger X3

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Door Lock/Window Switch - Passenger X3
Fig 1: Door Lock/Window Switch - Passenger X3 Connector End View
GM1664581Courtesy of GENERAL MOTORS CORP.
Door Lock/Window Switch - Passenger X3

Pin Wire Circuit Function
1 0.35 OG/BK 6162 Passenger Folding Mirror Motor Retract Control
2 0.35 GY/BK 6161 Passenger Folding Mirror Motor Extend Control
3 0.35 BK 628 Low Reference
4 - - Not Used
5 0.35 D-BU/WH 1315 Right Front Turn Signal Lamp Control (DL3 or DPN)
6 0.35 WH 7196 Passenger Folding Mirror Motor Retract Control
7 0.35 BK 2267 Mirror Heating Element Control
8 0.35 PK/BK 5862 Signal Return (UFT)
9 - - Not Used
10 0.35 BK/WH 1050 Ground (DL3 or DPN)
Connector Part Information
  • OEM Connector: 15491259
  • Service Connector: 15127042
  • Description: 10-Way F Kaizen 0.64 Series (BK)
Terminal Part Information
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215A/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.