SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSISELECTRICALWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR THROUGH ELECTRONIC POWER STEERING MODULE X1COMPONENT CONNECTOR END VIEWSAUTOMATIC LEVEL CONTROL (ALC) RELAY (G69 OR Z55)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Automatic Level Control (ALC) Relay (G69 or Z55)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Automatic Level Control (ALC) Relay (G69 or Z55)
Fig 1: Automatic Level Control (ALC) Relay (G69 or Z55) Connector End View
GM535912Courtesy of GENERAL MOTORS CORP.
Automatic Level Control (ALC) Relay (G69 or Z55)

Pin Wire Circuit Function
30 3 RD 1842 Battery Positive Voltage
85 0.5 PK 739 Ignition Voltage
86 0.5 L-BU/WH 1112 Damping Relay Coil Control
87 3 L-BU 2248 Automatic Level Control Compressor Relay Control
Connector Part Information
  • Harness Type: Chassis
  • OEM Connector: 12129716
  • Service Connector: 15306045
  • Description: 4-Way F Metri-Pack 280 Series, Flexlock (GY)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 15306045
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: Pins 30, 87- 12110853/4
  • Terminal/Tray: Pins 85, 86- 12110847/4
  • Core/Insulation Crimp: Pins 30, 87- Not Available
  • Core/Insulation Crimp: Pins 85, 86- E/5
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.