SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011TAHOE BASE, 5.3 0, 4WDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSWIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULECOMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) X7 (AN3)
2011 Chevrolet Tahoe Base, 5.3 0, 4WD

Memory Seat Module (MSM) X7 (AN3)

2011 Chevrolet Tahoe Base, 5.3 0, 4WDSECTION Memory Seat Module (MSM) X7 (AN3)
Fig 1: Memory Seat Module (MSM) X7 (AN3) Connector End View
GM1664553Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) X7 (AN3)

Pin Wire Circuit Function
1-4 - - Not Used
5 0.35 YE 5285 Adjustable Pedal Switch Rearward Signal (JF4)
6 - - Not Used
7 0.35 D-GN 1518 Driver Seat Front Vertical Up Switch Signal
8 0.35 YE 1519 Driver Seat Rear Vertical Up Switch Signal
9 0.35 TN 1522 Driver Seat Horizontal Forward Switch Signal
10 0.35 GY/BK 1269 Driver Seat Recline Forward Switch Signal
11-15 - - Not Used
16 0.35 D-GN 5060 Low Speed GMLAN Serial Data
17 0.35 D-BU 1520 Driver Seat Front Vertical Down Switch Signal
18 0.35 L-BU 1521 Driver Seat Rear Vertical Down Switch Signal
19 0.35 L-GN 1523 Driver Seat Horizontal Rearward Switch Signal
20 0.35 D-GN/WH 1270 Driver Seat Recline Rearward Switch Signal
Connector Part Information
  • Harness Type: Driver Seat
  • OEM Connector: 31410-1202
  • Service Connector: 15126709
  • Description: 20-Way F (TN)
Terminal Part Information
  • Terminated Lead: 13575845
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.