Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enter Programming Mode
Pressing the driver information center (DIC) personalization switch activates the first level DIC personalization menu items and a subsequent press activates the second level DIC personalization menu items. When the DIC personalization menu is entered and no switch is pressed, the personalization menu display times out and the DIC displays the last vehicle information screen that was present before entering personalization. Perform the following steps in order to enter the personalization programming mode:
- Press the DIC personalization button to access the first level personalization menu items and press the DIC personalization button to access the second level personalization menu items.
- Press the Set/Reset button to select items through the menu.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.