Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2011CHEVY EXPRESS G3500, VAN CARGO EXTENDED, 6.6 LREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICDISC BRAKE SYSTEMREPAIR INSTRUCTIONSFRONT BRAKE CALIPER BRACKET REPLACEMENT (JH5)INSTALLATION PROCEDURE

2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 L

Installation Procedure

2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 LSECTION Installation Procedure

Fig 1: Brake Caliper Bracket

Courtesy of GENERAL MOTORS CORP.

Install the brake caliper bracket.
Perform the following procedure before installing the brake caliper bracket bolts.
1. Remove all traces of the original adhesive patch.
2. Clean the threads of the bolt with denatured alcohol or equivalent and allow to dry.
3. Apply threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads of the bolt.

Fig 2: Caliper Bracket Bolts

Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.