Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011CHEVY EXPRESS G3500, VAN CARGO EXTENDED, 6.6 LREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINTERIOR/ILLUMINATION LIGHTSLIGHTING SYSTEMREPAIR INSTRUCTIONSTAIL LAMP REPLACEMENT
2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 L
Tail Lamp Replacement
2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 LSECTION Tail Lamp Replacement
Tail Lamp Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the back body side opening applique. Refer to Back Body Opening Side Applique and Tail Lamp Replacement . |
|
| 1 | Tail Lamp Nut (Qty: 3)
CAUTION:
Refer to Fastener Caution . Tighten 5 N.m (44 lb in) |
| 2 | Tail Lamp Electrical Connector Procedure
|
| 3 | Tail Lamp Assembly TIP: Remove the bulb sockets and service the bulbs as needed. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.