Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2011CHEVY EXPRESS G3500, VAN CARGO EXTENDED, 6.6 LREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTINTERIOR/ILLUMINATION LIGHTSLIGHTING SYSTEMREPAIR INSTRUCTIONSDOME LAMP REPLACEMENTREMOVAL PROCEDURE

2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 L

Removal Procedure

2011 Chevrolet Chevy Express G3500, Van Cargo Extended, 6.6 LSECTION Removal Procedure

Fig 1: Dome Lamp Lens

GM887178

Courtesy of GENERAL MOTORS CORP.

Using a flat bladed tool, pry the dome lamp lens open.

Fig 2: Dome Lamp Lens And Housing

GM887179

Courtesy of GENERAL MOTORS CORP.

Remove the dome lamp lens (2) completely from the dome lamp housing.

Fig 3: Dome Lamp Housing And Electrical Connector

GM887180

Courtesy of GENERAL MOTORS CORP.

Partially remove the dome lamp housing (1) from the headliner.
Disconnect the electrical connector (2) from the dome lamp housing.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.