Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2011CHEVY EXPRESS G1500, VAN CARGO, 4.3 XREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTANTI-THEFT SYSTEMSPOWER DOOR LOCK SYSTEM AND RELEASE SYSTEMSREPAIR INSTRUCTIONSREAR DOOR LOCK CYLINDER REPLACEMENTREMOVAL PROCEDURE
2011 Chevrolet Chevy Express G1500, Van Cargo, 4.3 X
Removal Procedure
2011 Chevrolet Chevy Express G1500, Van Cargo, 4.3 XSECTION Removal Procedure
- Remove the rear door trim panel, right side. Refer to Rear Door Trim Panel Replacement - Right Side (E24)
- Remove the rear door outside handle and license pocket (1). Refer to Rear Door Outside Handle and License Pocket Replacement .
- Remove the seal for the cylinder (2).
- Remove the clip that retains the lock cylinder lever (4) to the lock cylinder (3).
- Remove the lock cylinder (3) from the handle.
- Remove the lock cylinder (3) from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.