SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010MALIBU LT, 3.6 7REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 897 (POWER SEAT SYSTEM)REPAIR INSTRUCTIONSDRIVER OR PASSENGER SEAT ADJUSTER MEMORY MODULE REPLACEMENT
2010 Chevrolet Malibu LT, 3.6 7

Driver or Passenger Seat Adjuster Memory Module Replacement

2010 Chevrolet Malibu LT, 3.6 7SECTION Driver or Passenger Seat Adjuster Memory Module Replacement
WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seat Adjuster Memory Module
GM2229164Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the front seat. Refer to Driver or Passenger Seat Replacement .
1 Driver or Passenger Seat Adjuster Memory Module Fastener (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  4 N.m (35 lb in)
2 Driver or Passenger Seat Adjuster Memory Module

Procedure

  1. Disconnect the electrical connectors.
  2. Remove the module from the adjuster memory and wiring harness brackets.
  3. Refer to Control Module References for programing and setup information.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.