Outside Rearview Mirror Folding Control Module Replacement

2010 Chevrolet Equinox LTZ, 3.0 Y, AWDSECTION Outside Rearview Mirror Folding Control Module Replacement
Fig 1: Outside Rearview Mirror Folding Control Module
GM2247111Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure:Β 
Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
1 Outside Rearview Mirror Folding Control Module Bolts (Qty: 2)
CAUTION: Refer to Fastener Caution .

Tighten:Β  2.5 N.m (22 lb ft)

2 Outside Rearview Mirror Folding Control Module
Procedure:Β 
Disconnect electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.