Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2010CORVETTE BASE, 2D COUPE, AUTOMATICREPAIR AND DIAGNOSISELECTRICALBODY ELECTRICALCOMPONENT LOCATIONS - POWERTRAIN COMPONENT VIEWSPOWERTRAIN COMPONENT VIEWS

2010 Chevrolet Corvette Base, 2D Coupe, Automatic

Powertrain Component Views

2010 Chevrolet Corvette Base, 2D Coupe, AutomaticSECTION Powertrain Component Views

Fig 1: Top of Engine Components (LS7)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Engine Oil Tank
2	Throttle Body
3	Evaporative Emission (EVAP) Canister Purge Solenoid Valve
4	Manifold Absolute Pressure (MAP) Sensor
5	Ignition Coil 2
6	Ignition Coil 4
7	Ignition Coil 6
8	Ignition Coil 8
9	Fuel Injector 8
10	Fuel Injector 6
11	Fuel Injector 4
12	Fuel Injector 2
13	Fuel Injector 1
14	Fuel Injector 3
15	Fuel Injector 5
16	Fuel Injector 7
17	Ignition Coil 7
18	Ignition Coil 5
19	Ignition Coil 3
20	Ignition Coil 1
21	Generator
22	Camshaft Position (CMP) Sensor (LS3 and LS7)
23	Engine Oil Level and Temperature Sensor (LS3)

Fig 2: Left Side of Engine Components (LS7)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Manifold Intake Check Valve
2	Engine Oil Pressure (EOP) Sensor
3	Heated Oxygen Sensor (HO2S) - Bank 1 Sensor 2
4	Heated Oxygen Sensor (HO2S) - Bank 1 Sensor 1
5	Knock Sensor (KS) 1
6	Engine Coolant Temperature (ECT) Sensor

Fig 3: Right Side of Engine Components (LS7)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Crankshaft Position (CKP) Sensor
2	Knock Sensor (KS) 2
3	Heated Oxygen Sensor (HO2S) - Bank 2 Sensor 1
4	Starter Motor
5	Heated Oxygen Sensor (HO2S) - Bank 2 Sensor 2

Fig 4: Top of Engine Components (LS9)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Fuel Injector 7
2	Ignition Coil 7
3	Fuel Injector 5
4	Ignition Coil 5
5	Fuel Injector 3
6	Ignition Coil 3
7	Fuel Injector 1
8	Ignition Coil 1
9	Engine Coolant Temperature (ECT) Sensor
10	Fuel Injector 2
11	Ignition Coil 2
12	Ignition Coil 4
13	Fuel Injector 4
14	Ignition Coil 6
15	Fuel Injector 6
16	Ignition Coil 8
17	Fuel Injector 8
18	Engine Oil Pressure (EOP) Sensor

Fig 5: Engine Harness Components (LS9) 1 of 3

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Engine Oil Pressure (EOP) Sensor
2	Turn Signal Repeater Lamp - Right (T90)
3	Engine Control Module (ECM) X1
4	X180
5	Fuse Block - Underhood X3
6	Fuse Block - Underhood X4
7	Heated Oxygen Sensor (HO2S) - Bank 2 Sensor 1
8	Ignition Coil 8
9	Ignition Coil 6
10	Ignition Coil 4
11	Generator X1
12	Manifold Absolute Pressure (MAP) Sensor
13	Generator X2
14	Supercharger Air Inlet Pressure Sensor (JL9)
15	A/C Compressor Clutch
16	Wheel Speed Sensor (WSS) - Right Front
17	Suspension Position Sensor - Right Front (FE2)
18	Ignition Coil 2
19	Fuse Block - Underhood X1
20	Fuse Block - Underhood X2
21	X182
22	X184
23	X186
24	Engine Oil Temperature Sensor (LS7/LS9)
25	Engine Control Module (ECM) X3
26	Engine Control Module (ECM) X2
27	Heated Oxygen Sensor (HO2S) - Bank 2 Sensor 2
28	G106
29	Knock Sensor (KS)
30	Starter Motor X1
31	Starter Motor X2
32	Crankshaft Position (CKP) Sensor

Fig 6: Engine Harness Components (LS9) 2 of 3

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Fuse Block - Underhood X2
2	Generator X1
3	Generator X2
4	Supercharger Air Inlet Pressure Sensor (JL9)
5	Barometric Pressure (BARO) Sensor
6	X149
7	Evaporative Emission (EVAP) Canister Purge Solenoid Valve
8	Supercharger Bypass Valve Solenoid (JL9)
9	Manifold Absolute Pressure (MAP) Sensor
10	X150
11	Heated Oxygen Sensor (HO2S) - Bank 1 Sensor 1
12	Heated Oxygen Sensor (HO2S) - Bank 1 Sensor 2
13	Ignition Coil 7
14	Ignition Coil 5
15	Ignition Coil 3
16	Ignition Coil 1
17	Suspension Position Sensor - Left Front (FE2)
18	Wheel Speed Sensor (WSS) - Left Front
19	Engine Coolant Temperature (ECT) Sensor
20	Camshaft Position (CMP) Sensor
21	Electronic Brake Control Module (EBCM)
22	Variable Effort Steering Actuator
23	Throttle Body
24	Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor
25	Knock Sensor (KS)

Fig 7: Engine Harness Components (LS9) 3 of 3

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	X149
2	Fuel Injector 8
3	Supercharger Air Inlet Pressure Sensor (JL9)
4	Engine Oil Pressure (EOP) Sensor
5	Fuel Injector 7
6	X150
7	Ignition Coil 7
8	Manifold Absolute Pressure (MAP) Sensor
9	Fuel Injector 5
10	Ignition Coil 5
11	Fuel Injector 3
12	Ignition Coil 3
13	Ignition Coil 1
14	Fuel Injector 1
15	Supercharger Bypass Valve Solenoid (JL9)
16	Evaporative Emission (EVAP) Canister Purge Solenoid Valve
17	Throttle Body
18	Fuel Injector 2
19	Generator X2
20	Ignition Coil 2
21	Fuel Injector 4
22	Ignition Coil 4
23	Fuel Injector 6
24	Barometric Pressure (BARO) Sensor
25	Ignition Coil 6
26	Ignition Coil 8

Fig 8: Automatic Transmission Components (MYC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Control Solenoid Valve Assembly

Fig 9: Automatic Transmission Internal Components (MYC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Control Solenoid Valve Assembly
2	Automatic Transmission Input Shaft Speed (ISS) Sensor and Output Shaft Speed (OSS) Sensor Harness
3	Automatic Transmission Internal Mode Switch (IMS) Harness

Fig 10: Manual Transmission Components - Left Side (MM6/MZ6/MN6)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Reverse Lockout Solenoid
2	Skip Shift Solenoid
3	Vehicle Speed Sensor (VSS)

Fig 11: Manual Transmission Components - Right Side (MM6/MZ6/MN6)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Manual Transmission Fluid Temperature Sensor
2	Backup Lamp Switch

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.