Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISRESTRAINTSAIR BAG, SRSSUPPLEMENTAL INFLATABLE RESTRAINT SYSTEMREPAIR INSTRUCTIONSINFLATABLE RESTRAINT SEAT POSITION SENSOR REPLACEMENTREMOVAL PROCEDURE
2010 Chevrolet Chevy Express G3500, Van Passenger Extended
Removal Procedure
2010 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Removal Procedure
- Remove the seat from the vehicle. Refer to Driver or Passenger Seat Replacement .
- Disconnect the electrical connector from the seat position sensor.
- Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
- Remove the seat position sensor from the seat adjuster track bracket.
WARNING:
Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.