Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISBODY & FRAMEFIXED AND MOVEABLE WINDOWS SYSTEMREPAIR INSTRUCTIONSFRONT SIDE DOOR WINDOW SWITCH REPLACEMENTREMOVAL PROCEDURE
2010 Chevrolet Chevy Express G3500, Van Passenger Extended
Removal Procedure
2010 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Removal Procedure
- Remove the front door trim plate. Refer to Front Door Trim Plate Replacement .
- Remove the electrical connector (3) from the power window switch.
- Release the clip from the front door trim plate (1) in order to remove the escutcheon from the trim plate (1).
- Release the tabs on the power window switch (10) in order to remove the power window switch (10) from the trim plate.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.