Fastener Tightening Specifications

2010 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Fastener Tightening Specifications
Application Specification
Metric English
BPMV Bracket Bolt 25 N.m 18 lb ft
BPMV Shield Bolt 25 N.m 18 lb ft
BPMV Shield Nut 25 N.m 18 lb ft
Brake Pipe Fitting 25 N.m 18 lb ft
Brake Pressure Modulator Valve (BPMV) Bolt 11 N.m 97 lb in
Electronic Brake Control Module (EBCM) Bolt 3 N.m 27 lb in
Wheel Speed Sensor Bolt - Front 18 N.m 13 lb ft
Wheel Speed Sensor Bolt - Rear 14 N.m 124 lb in
Yaw Rate Sensor with Lateral Accelerometer Nut 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.