SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2010AVEO LT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISSTEERINGSTEERING WHEEL & STEERING COLUMNSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2010 Chevrolet Aveo LT, 4D Hatchback, Standard

Fastener Tightening Specifications

2010 Chevrolet Aveo LT, 4D Hatchback, StandardSECTION Fastener Tightening Specifications
Application Specification
Metric English
Coupling Flange Pinch Bolt 22 N.m 16 lb ft
Ignition Switch Housing Sheer Bolts 11 N.m 97 lb in
Ignition Switch Retaining Screw 2 N.m 18 lb in
Key Interlock Solenoid Screws 2 N.m 18 lb in
Key Reminder Switch Screws 2 N.m 18 lb in
Lower Instrument Trim Panel Screws 3 N.m 27 lb in
Lower Steering Column Cover Panel Screws 3 N.m 27 lb in
Steering Column Jacket Assembly Bracket Nuts 22 N.m 16 lb ft
Steering Wheel Nut 38 N.m 28 lb ft
Support Housing Screws 16 N.m 12 lb ft
Tilt Steering Lever Cap Screw 4 N.m 35 lb in
Turn Signal Switch Housing Screws 3 N.m 27 lb in
Upper and Lower Steering Column Cover Panel Screws 3 N.m 27 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.