Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2010AVEO LT, 4D HATCHBACK, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 66 (VEHICLE DIAGNOSTIC INFORMATION - SPECIFICATIONS - SCAN TOOL DATA)SPECIFICATIONSINFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE SCAN TOOL INFORMATION
2010 Chevrolet Aveo LT, 4D Hatchback, Standard
Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
2010 Chevrolet Aveo LT, 4D Hatchback, StandardSECTION Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
Supplemental Inflatable Restraint Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions:Β Ignition ON | |||
| Battery Voltage | - | Varies | This displays Volts. This is the current battery voltage signal. |
| Driver Air Bag Stage 1 Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the driver air bag stage 1 loop. |
| Driver Air Bag Stage 2 Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the driver air bag stage 2 loop. |
| Driver Head Curtain Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the driver head curtain loop. |
| Driver Pretensioner Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the driver pretensioner loop. |
| Driver Seat Belt Switch | - | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt switch. |
| Ignition Voltage | - | Varies | This displays Volts. This is the current ignition voltage signal. |
| LH Side Air Bag Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the LH side air bag loop. |
| ODS Status | - | Present | This displays Present or Not Present. Present is displayed if the occupant detection system is available. |
| Passenger Air Bag Status | - | Present | This displays Present or Not Present. Present is displayed if the passenger air bag is available. |
| Passenger Presence System | - | Present | This displays Present or Not Present. Present is displayed if the passenger presence system is available. |
| Passenger Pretensioner Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the passenger pretensioner loop. |
| Psgr. Frontal Stage 1 Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the passenger air bag stage 1 loop. |
| Psgr. Frontal Stage 2 Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the passenger air bag stage 2 loop. |
| Psgr. Head Curtain Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the passneger head curtain loop. |
| Passenger Seat Belt Switch | - | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the passenger seat belt switch. |
| RH Side Air Bag Resistance | - | 0 Ξ© | The scan tool displays resistance. This is the resistance of the RH side air bag loop. |
| SIR Warning Lamp | - | Off | The scan tool displays On or Off. This is the state of the SIR warning indicator. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.