Removal Procedure

2010 Chevrolet Aveo LT, 4D Hatchback, StandardSECTION Removal Procedure
WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Interior Courtesy Lamp Retaining Tabs
    GM2083023Courtesy of GENERAL MOTORS CORP.
  1. Remove the interior courtesy lamp (1). Refer to Interior Courtesy Lamp Replacement .
  2. Fig 2: Onstar Button Cover, Screws & Electrical Connector
    GM2083018Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector (2).
  4. Remove the screws (1) and the OnStar button cover (3) from the interior courtesy lamp.
  5. Remove the OnStar cellular microphone from the interior courtesy lamp.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.