Removal Procedure

2010 Chevrolet Aveo LT, 4D Hatchback, StandardSECTION Removal Procedure
WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Screws And Cellular/Navigation Antenna
    GM2083028Courtesy of GENERAL MOTORS CORP.
  1. Lower the headliner. Refer to Headlining Trim Panel Replacement .
  2. Disconnect the connector of the antenna coax cable.
  3. Remove the screws (2) and the cellular/navigation antenna (1).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.