SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009UPLANDER LT, 3.9 MREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSVEHICLE ACCESSSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2009 Chevrolet Uplander LT, 3.9 M

Fastener Tightening Specifications

2009 Chevrolet Uplander LT, 3.9 MSECTION Fastener Tightening Specifications
Application Specification
Metric English
Cable Guide Bracket Screws 10 N.m 89 lb in
Front Door Handle Bolts 10 N.m 89 lb in
Front Door Lock Actuator Screws 2 N.m 18 lb in
Front Door Lock Module Screws 10 N.m 89 lb in
Front Door Lock Striker Screws 25 N.m 18 lb ft
Liftgate Lock Cylinder Retaining Nuts 10 N.m 89 lb in
Rear Roller Cover Screw 9 N.m 80 lb in
Sliding Door Latch Screws 10 N.m 89 lb in
Sliding Door Lock Module Screws 10 N.m 89 lb in
Sliding Door Handle Lock Actuator Screws 10 N.m 89 lb in
Sliding Door Outside Handle Bolts 10 N.m 89 lb in
Sliding Door Power Unlatch Release Actuator Screws 10 N.m 89 lb in
Sliding Door Rear Lock Srcews 10 N.m 89 lb in
Sliding Door Striker Screws 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.