Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
When the headlamp switch is in the AUTO position, the body control module (BCM) receives a ground signal through the headlamp switch headlamps OFF signal circuit and no signal on the headlamp switch headlamp ON signal circuit and headlamp switch park lamps ON signal circuit. When the headlamp switch is in the PARK or HEAD position, the BCM receives no signal through the headlamp switch headlamps OFF signal circuit and a ground signal through the headlamp switch headlamp ON signal circuit and headlamp switch park lamps ON signal circuit.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.