SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 645 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 5 OF 5)WINDOW SWITCH - LEFT REAR
2009 Chevrolet Tahoe Base, 4.8 C

Window Switch - Left Rear

2009 Chevrolet Tahoe Base, 4.8 CSECTION Window Switch - Left Rear
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch - Left Rear Connector End View
GM556473Courtesy of GENERAL MOTORS CORP.
Window Switch - Left Rear

Pin Wire Color Circuit Function
A 0.35 D-GN 168 Power Window Master Switch Left Rear Up Signal
B 0.5 BN/WH 230 Instrument Panel Lamp Dimming Control
C 0.35 PU 169 Power Window Master Switch Left Rear Down Signal
D 0.35 D-BU 1307 Power Window Master Switch Lockout Signal
E 2 D-BU 668 Power Window Motor Left Rear Up Control
F 3 BK 1150 Ground
G 3 RD/WH 1240 Battery Positive Voltage
H 2 BN 669 Power Window Motor Left Rear Down Control
Connector Part Information 
  • OEM: 15326924
  • Service: 15306174
  • Description: 8-Way F GT 280 Series (BK)
Terminal Part Information 
  • Pins: A-D
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: E-H
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: Pins E, H - 4/4
  • Core/Insulation Crimp: Pins F, G - F/D
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.