Engine Oil Pressure (EOP) Sensor

2009 Chevrolet Tahoe Base, 4.8 CSECTION Engine Oil Pressure (EOP) Sensor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Oil Pressure (EOP) Sensor Connector End View
GM1519475Courtesy of GENERAL MOTORS CORP.
Engine Oil Pressure (EOP) Sensor

Pin Wire Color Circuit Function
1 0.35 BK 2755 Low Reference
0.5 BK 2755 Low Reference (HP2)
2 0.35 GY 2705 5-Volt Reference
0.5 GY 2705 5-Volt Reference (HP2)
3 0.35 TN/WH 331 Oil Pressure Sensor Signal
0.5 TN/WH 331 Oil Pressure Sensor Signal (HP2)
Connector Part Information 
  • OEM: 15477863
  • Service: 88988301
  • Description: 3-Way F GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 15326267/19
  • Core/Insulation Crimp: E/4
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.