SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 411 (COMPONENT LOCATIONS - ELECTRICAL CENTER IDENTIFICATION VIEWS)ELECTRICAL CENTER IDENTIFICATION VIEWSFUSE BLOCK - I/P X1
2009 Chevrolet Tahoe Base, 4.8 C

Fuse Block - I/P X1

2009 Chevrolet Tahoe Base, 4.8 CSECTION Fuse Block - I/P X1
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuse Block - I/P X1 Connector End View
GM1667403Courtesy of GENERAL MOTORS CORP.
Fuse Block - I/P X1

Pin Wire Circuit Function
A1 0.8 TN 201 Left Front Speaker Output (+)
A2 0.8 GY 118 Left Front Speaker Output (-)
A3-A4 - - Not Used
A5 0.35 GY 1690 Automatic Day/Night Mirror Signal (with DL3 or with DR4)
A6 0.35 PK 1691 Low Reference (with DL3 or with DR4)
B1 - - Not Used
B2 0.5 RD/WH 2540 Battery Positive Voltage
B3 - - Not Used
C1 - - Not Used
C2 0.5 D-GN 5060 Low Speed GMLAN Serial Data
C3 0.5 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage (with DL3 or with DPN)
C4 0.5 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage (with DL3 or with DPN)
C5-C6 - - Not Used
D1 0.8 RD/WH 3040 Battery Positive Voltage
D2 0.8 RD/WH 2940 Battery Positive Voltage
E1 3 BK 1850 Ground
E2 0.5 RD/WH 240 Battery Positive Voltage
0.8 RD/WH 240 Battery Positive Voltage
E3 5 RD/BK 842 Battery Positive Voltage
F1 5 RD/BK 42 Battery Positive Voltage
F2 0.8 TN 294 Door Lock Actuator Unlock Control (without E52)
F3 0.5 RD/WH 3840 Battery Positive Voltage
G1 0.8 GY 295 Door Lock Actuator Lock Control (without E52)
G2 0.8 RD/WH 1040 Battery Positive Voltage
0.8 RD/WH 1040 Battery Positive Voltage (X88 or Z88)
H1-H4 - - Not Used
H5 0.5 RD/WH 1540 Battery Positive Voltage (U42)
H6 0.5 RD/WH 3240 Battery Positive Voltage (UE1)
J1 0.8 RD/WH 2740 Battery Positive Voltage
J2 0.8 RD/WH 2240 Battery Positive Voltage
J3 0.5 RD/WH 2140 Battery Positive Voltage
K1 0.35 BN 6136 LED Dimming Supply Voltage
K2 0.35 YE 6817 LED Backlight Dimming Control
K3-K6 - - Not Used
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 13552254
  • Service Connector: 19178190
  • Description: 40-Way F GT 150 280 Metri-Pack 800 Series (BK)

Terminal Part Information
  • Pins: A1, A2, A5, A6, C2-C4, K1, K2, H5, H6
  • Terminated Lead: 13575735
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: Pins A1, A2 - C/A
  • Core/Insulation Crimp: Pins A5, A6, C2-C4, K1, K2, H5, H6 - E/C
  • Pins: B2, D1, D2, E2, F2, F3, G1, G2, J1-J3
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: 2/A
  • Pins: E1
  • Terminated Lead: 13575756
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: F/D
  • Pins: E3, F1
  • Terminated Lead: 13575718
  • Release Tool: J-38125-558
  • Diagnostic Test Probe: J-35616-44 (YE)
  • Terminal/Tray: 12110127/19
  • Core/Insulation Crimp: F/G
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.