Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The interior liftgate control switch has of a push button switch to command the liftgate to open and close. The liftgate module monitors the voltage level on the open/close signal circuit, when the switch is not being pressed the voltage level is at the system voltage. When the switch is pressed a contact within the interior liftgate control switch closes providing a ground path for the signal circuit causing the voltage level to drop to near zero volts. The liftgate module will detect the voltage drop and will then command the liftgate to open or close depending upon the current state of the liftgate at the time the switch is pressed.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.