Wheel Alignment Specifications

2009 Chevrolet Tahoe Base, 4.8 CSECTION Wheel Alignment Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Model Caster Cross Caster (L-R) Camber Cross Camber (L-R) Toe Steering Wheel Angle
Left Right
IMPORTANT: Caster is now relative to ground.
C/K 1500
Tahoe/Yukon/Suburban/Yukon XL/Avalanche
w/17" Tires
w/QJP, QJM, QAN and R5C (Equipped with Bridgestone Tires)
3.35° ± 1.00° 3.45° ± 1.00° -0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Tahoe/Yukon/Suburban/Yukon XL/Avalanche
w/17" Tires
w/QAS, QAN and R4Y (Equipped with Goodyear Tires)
3.20° ± 1.00° 3.60° ± 1.00° -0.40° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Tahoe/Suburban/Avalanche/Yukon Denali/Yukon Denali XL/Escalade/Escalade ESV/Escalade EXT/Two Mode Hybrid
w/18" Tires
w/QXK and Y91
3.45° ± 1.00° 3.35° ± 1.00° +0.10° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Tahoe/Suburban/Avalanche/Yukon/Yukon XL/Escalade/ Escalade ESV/Escalade EXT/Two Mode Hybrid
w/18" Tires
w/QXN and Z71, QXO and EXP
3.30° ± 1.00° 3.50° ± 1.00° -0.20° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Tahoe/Yukon/Suburban/Yukon XL/Yukon Denali/Yukon Denali XL/Avalanche/Two Mode Hybrid
w/20" Tires
w/QSS and R5C (Equipped with Bridgestone Tires)
3.55° ± 1.00° 3.25° ± 1.00° +0.30° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Tahoe/Yukon/Suburban/Yukon XL/Yukon Denali/Yukon Denali XL/Avalanche/Two Mode Hybrid
w/20" Tires
w/QSS and R4Y (Equipped with Goodyear Tires)
3.50° ± 1.00° 3.50° ± 1.00° 0.00° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 1500
Escalade/Escalade ESV/Escalade EXT/Two Mode Hybrid
w/22" Tires
w/QST
3.30° ± 1.00° 3.50° ± 1.00° -0.20° ± 0.75° -0.10° ± 0.60° 0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
C/K 2500
Suburban, Yukon XL
All
3.50° ± 1.00° 3.75° ± 1.00° -0.25° ± 0.75° +0.25° ± 0.60° +0.00° ± 0.60° +0.10° ± 0.20° -1.0° ± 3.5°
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.