SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 346 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - I THROUGH M)COMPONENT CONNECTOR END VIEWS - L THROUGH MINFLATABLE RESTRAINT SIDE IMPACT MODULE - RIGHT FRONT (EXCEPT HP2)
2009 Chevrolet Tahoe Base, 4.8 C

Inflatable Restraint Side Impact Module - Right Front (except HP2)

2009 Chevrolet Tahoe Base, 4.8 CSECTION Inflatable Restraint Side Impact Module - Right Front (except HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Side Impact Module - Right Front (except HP2)
GM295469Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Side Impact Module - Right Front (except HP2)

Pin Wire Circuit Function
A 0.5 PU 3066 Inflatable Restraint Side Impact Module - Right Front High Control
B 0.5 TN/BK 3067 Inflatable Restraint Side Impact Module - Right Front Low Control
Connector Part Information 
  • Harness: Body
  • OEM: 12110505
  • Service: 15306044
  • Description: 2-Way F Metri-Pack 150 Series (YE)
Terminal Part Information 
  • Terminal/Tray: Service by Connector Assembly - 15306044
  • Core/Insulation Crimp: Service by Connector Assembly - See Part Catalog
  • Release Tool/Test Probe: J-38125-12A/J-35616-14 (GN)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.